Actiontec electronic DSL Modem GT701WG-QW04 - Manual (Page 72)

67
Static IP Address
on the Computer
To communicate with the Modem from a computer on the network (to use
the Web Configuration Utility, for example), the user may have to switch the
IP
address settings from DHCP -enabled to static IP , so that the computer and the
Modem are on the same subnet.
To set up static IP on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Modem’s
factory default IP address. If the Modem’s IP address has been
changed, enter the new IP address when instructed to enter an
IP address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
b