COOK Gemini - Manual

1
Ceiling, Wall and Cabinet Fans
SUPPLEMENTAL INSTALLATION INSTRUCTIONS
Gemini Isolator Kit
This publication contains the installation instruc-
tions for the GIK - Gemini Isolator Kit. Carefully read
this publication prior to installation.
Loren Cook catalog, Gemini , provides additional informa-
tion describing the equipment, fan performance, available
accessories and specification data.
For additional safety information, refer to AMCA publica-
tion 410-96, Safety Practices for Users and Installers of
Industrial and Commercial Fans .
All of the publications listed above can be obtained from
Loren Cook Company by phoning 417/869-6474, extension
166; by FAX at 417/832-9431; or by e-mail at info@loren-
cook.com.
For information and instructions on special equipment,
contact Loren Cook Company at 417/869-6474.
Receiving and Inspection
Upon receiving the parts for the Gemini Isolator Kit, care-
fully inspect the parts package for any damage and/or
shortage.
Installation
a. Remove mounting brackets from box. (Supplied with
fan.)
b. Install isolator bushings into 1/2” holes in mounting
brackets with thick side of bushing facing the floor. Iso-
lator bushings may be heated to ease installation.
c. Install mounting brackets onto fan using screws pro-
vided.
d. Slip eyelets into isolator bushings with flange side
down.
e. Hang fan on four 1/4” x 20 tpi “all thread” per illustra-
tion using eight flanged 1/4” x 20 tpi nuts. Adjust fan
height and level per installation requirements.
f. Tighten nuts against eyelets to capture isolator bush-
ings securely.
WARNING
This unit has rotating parts. Safety precautions
should be exercised at all times during installation,
operation, and maintenance.
ALWAYS disconnect power prior to working on fan.
Mounting Bracket
Flanged 1/4” x 20
tpi nut
Isolator Bushings
1/4” x 20 tpi “all
thread” supplied
by others
Eyelets
Parts List - GIK
Part Name Qty.
Isolator Bushings 4
Flanged 1/4” x 20 Nuts 8
Eyelets 4
Pre Assembly
Assembled
Illustration of Assembled Unit
Flanged 1/4” x 20
tpi nut
Flanged 1/4” x 20
tpi nut
Isolator Bushings
1/4” x 20 tpi “all
thread” supplied
by others
GIK IOM Supplement - JANUARY 2000