COOK GEMINI 200, 300, & 500 PRE-2014 MOTOR User Manual
Gemini
DATE:
GEMINI
GEMINI 200, 300, & 500
PRE-2014 MOTOR
REPLACEMENT
INSTRUCTIONS
PLEASE REFERENCE THIS DRAWING ON THE ORDER BY THIS NUMBER: GEMINI REPLACEMENT MOTOR GRAPHIC 200 500
PROJECT:
LOCATION:
-
-
-
INSTALLATION INSTRUCTIONS:
1. SHUT OFF AND LOCK OUT POWER TO FAN.
2. REMOVE GRILLE
3. UNPLUG MOTOR CABLE FROM FIELD WIRING BOX.
4. REMOVE (4) SCREWS HOLDING INTERNAL ASSEMBLY
TO HOUSING AND PREPARE TO DIS-ASSEMBLE.
5. USE A ALLEN WRENCH TO LOOSEN AND REMOVE FAN WHEEL.
6. REMOVE (4) HEX NUTS TO REMOVE MOTOR.
7. INSTALL MOTOR IN REVERSE ORDER AND REPLACE
INTERNAL ASSEMBLY MAKING SURE TO FASTEN RING TERMINAL
OF GREEN WIRE TO HOUSING IN PLACE OF EXISTING GROUND
WIRE IN ORDER TO PROPERLY GROUND THE MOTOR.
8. CONNECT PLUG FROM MOTOR TO PLUG IN FIELD WIRING BOX.
9. RESTORE POWER TO FAN AND INSPECT FOR PROPER OPERATION.
10. REPLACE GRILLE.
PRE-2014
GROUND WIRE
(STAND ALONE WIRE)
2014 STYLE GROUND
WIRE IS PART OF MOTOR
HARNESS. (GREEN / YEL
STRIPE OR SOLID GREEN)
ISOLATOR
GROMMET
ISOLATOR
HEX NUT
(INSIDE HOUSING)
MOTOR
MOTOR
MOUNTING
BRACE