7966 nicd 107 pump for pool_2.ai – AeroBed Family Quick Pool with Built-In Seats User Manual

Page 2

LIMITED EXPRESS WARRANTY

Aero Products International, Inc. (“us”) warrants to the original purchaser (“you”) that the AeroBed (“product”) is guaranteed against defects in materials and

workmanship for the following periods: pump and valve, one (1) year from date of purchase; pool, ninety (90) days from date of purchase.

OUR EXCLUSIVE OBLIGATION, AND YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY OR OTHERWISE SHALL BE THE REPAIR OR

REPLACEMENT OF ANY PRODUCT OR PARTS WHICH MAY PROVE DEFECTIVE UNDER THE CONDITIONS OF NORMAL USE DURING THE WARRANTY PERIOD.

IN THE EVENT THE PRODUCTS OR PARTS CANNOT BE REPAIRED OR REPLACED, YOU SHALL RECEIVE A PRODUCT OF COMPARABLE VALUE AT OUR

EXPENSE. AEROBED WARRANTY IS NONTRANSFERABLE, AND IS VALID FOR THE FIRST, ORIGINAL PURCHASER FROM AN AUTHORIZED DEALER OR

AEROBED PRODUCTS. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE

TO STATE.

Exclusions

Our obligation under this limited express warranty shall not apply if our inspection shows:

A. That the product is used for other than normal indoor sleeping purposes.

B. Any product or part has been damaged by alteration.

C. Any product or part has been subject to accident, misuse, abuse or has been operated contrary to our written instructions.

Warranty Redemptions

You must obtain an authorization from us before returning a defective product. Call us at 1-888-462-4468 or write us at Aero Products International, Inc., 1834

Walden Office Square, Third Floor, Schaumburg, IL 60173 for a return authorization. The product should be carefully packaged and delivered postage or delivery

charges prepaid at the address set forth above. You are responsible for all damages incurred in shipping.

Warranty Disclaimer

EXCEPT FOR THE LIMITED EXPRESS WARRANTY SET FORTH IN THIS SECTION, OR ANY IMPLIED WARRANTIES PERMITTED UNDER APPLICABLE LAW,

SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATIONS. ALL CLAIMS AGAINST US MUST BE BROUGHT WITHIN ONE (1) YEAR FROM THE TIME THEY

ARISE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE DISCLAIMER MAY NOT APPLY TO YOU.

Limitation of Liability

TO THE FULLEST EXTENT PERMITTED BY LAW, SELLER SHALL NOT BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WITH

RESPECT TO THE SALE OR USE OF THE PRODUCTS, INCLUDING ANY LOST REVENUES, LOSS OF USE OR LOST PROFITS, REGARDLESS OF THE THEORY BY

WHICH ANY CLAIM MAY BE BASED, INCLUDING ANY TORT, TANGIBLE PROPERTY DAMAGE OR STATUTORY CAUSES OF ACTION. NOTWITHSTANDING THE

TERM OF ANY LIMITED OR IMPLIED WARRANTY, OR IN THE EVENT THAT ANY LIMITED WARRANTY FAILS OF ITS ESSENTIAL PURPOSE, IN NO EVENT WILL OUR

ENTIRE LIABILITY TO YOU EXCEED THE PURCHASE PRICE ACTUALLY PAID BY YOU FOR THE PRODUCTS, OR ANY DEFECTIVE OR NONCONFORMING

PORTION THEREOF, WHICHEVER IS THE LESSER AMOUNT.

THIS LIMITATION DOES NOT APPLY TO ANY CLAIMS FOR PERSONAL INJURY. THIS AGREEMENT AND ANY CLAIMS AND DISPUTES BETWEEN THE PARTIES

SHALL BE GOVERNED BY AND SUBJECT TO THE INTERNAL LAWS (EXCLUSIVE OF THE CONFLICTS OF LAW PROVISION) AND DECISIONS OF THE COURTS OF

THE STATE OF ILLINOIS. THE EXCLUSIVE VENUE AND JURISDICTION FOR ALL CLAIMS AND DISPUTES SHALL BE THE STATE OR FEDERAL COURT LOCATED IN

SCHAUMBURG, ILLINOIS.
Aero Products International, Inc. neither assumes nor authorizes any representative or other person to assume any obligation or liability other than those expressly set

forth herein.

This product may be covered under one or more of the following U.S. and/or foreign patents: U.S. Pat. Nos. 4,977,633; 5,267,363; 5,367,726; 6,237,621;

6,508,264; 6,598,626; 6,701,559 ; 6,755,208; 6,986,360; 6,996,867; 7,025,576; 7,039,972; 7,165,283; D464,225; D490,635; D513,145; CN 1809683.2; RU

2271129; SG93011; EP 0 487 641 ; DE 69024962.4; EP 0 947 152; DE 69233298.7; EP 0 605 624 ; DE 69230797.4; JP 3,419,774; TW 62301; AU

731613; BR PI9710873-1; CN 97196557.9 ; HK 1025374; MX 216898; MX 242683; NZ 334203; SG 61207; JP 2010828; EP 1 359 325; EP 1 415 576.

Other U.S. and foreign patents pending.

Made in China.

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION

MAY NOT APPLY TO YOU.

TROUBLESHOOTING

Very rarely, your AeroBed

pool may fail to inflate properly. Should this occur, please use the following check list.

1. Check to make sure your pump is fully charged.

2. If your pool doesn’t appear to be inflating:

First, make sure the Quick Air Release Valve is closed.

If the valve is open, close it by using 2 thumbs to push cover firmly into valve. Be careful to avoid pushing valve cover to right or left as it snaps into valve opening.

3. If air leakage from the Quick Air Release Valve occurs:

Carefully, inspect the soft round gasket on the inside of Quick Air Release Valve cover. Make sure there is no dirt or debris, cuts, nicks, or tears to the gasket. If there is dirt or

debris; clean and use. If cut, nicked or torn, call our Customer Service Center or visit our website to order a replacement part.

4. If trouble persists, please phone our Customer Service Center for assistance.

U.S.: 1-888-462-4468

Monday through Friday, 9 AM to 5 PM Central Standard Time
Canada: 1-888-702-8281

or visit our website at: www.aerobed.com

DEFLATION AND STORAGE

1. To empty pool, open water release valve (s) on the bottom of the pool.

2. Once the pool is completely drained, open black Air Release Valve (s) to deflate. With your thumb or forefinger, squeeze the tab toward

the center of the Air Release Valve cover until it opens.

3. Each seat has a separate flapper valve. In order to deflate the built-in seats, you must twist off the valve cover and push open flapper to release

all the air.

3. Tightly fold pool towards the Air Release Valve end until all air is expelled. Unfold and let dry completely before storing.

4. Push the Air Release Valve closed until it locks.

CARE AND MAINTENANCE

1. Inspect your pool prior to each use.

2. Keep your pool away from rocks, sticks or any sharp objects. Large cuts or snags may not be repairable and will not be covered by your pool warranty.

3. When not in use, store your pool in a clean, dry place out of direct sunlight. Product must be at least room temperature prior to inﬂating.

4. You may clean your pool with a mild dishwashing detergent and warm water, or spray it off with a garden hose. Do not use chemicals or other compounds.

Allow your pool to air dry completely after cleaning.

5. Do not allow water to enter your pool through the valve(s). If water does enter the pool through the valve(s), make sure to empty it and completely dry the pool before storing.

PRODUCT USE

1. Prior to each use, ﬁll pool with fresh, clean water. Pool should be ﬁlled to the top of bottom ring. Please refer to Maximum Water level mark on the side of the pool.

2. Water in the pool should be changed daily.

3. As in any recreational activity, reckless use, misuse, and/or neglect of this pool may result in serious injury or death. It is your responsibility to refer to the safety

instructions.

4. Pool should be emptied and stored when not in use.