Panasonic WJ-NV200 - User Manual

Page 78

[Password]
To copy with password protection, mark the corre-
sponding checkbox and input a password. The pass-
word will be required to play back the copied data.

[Data size]
When the [Measurement] button is clicked, size of the
data to be copied will be displayed.

[Free]
The remaining capacity of the destination medium
(SD memory card) will be displayed.

Step 4

Click the [OK] button. The confirmation window will
be displayed. Then, click the [OK] button of the win-
dow.
→ The data copy window will close. Copying will

start and the icon will be displayed in the status
display area. When copying is complete, the
[COPY] icon will disappear.

Important:

• Do not remove the SD memory card during copy-

ing on the SD memory card. It may damage data
on the SD memory card.

• When the copy end time is set earlier than the

start time, copying will not start even when the
[Copy] button is clicked.

• When copy medium lacks enough storage space,

data will be copied until the copy medium is full.
Use a medium with sufficient storage capacity to
avoid left over data that is not copied.

• Copying will be performed in the following order:

Viewer Software → Images → Audio Depending
on the designated time range for copying and the
remaining space of the storage medium, images
and audio may not be copied.

• When clicking the button in the [COPY] box during

copying, the confirmation window for cancellation
of the current copying will be displayed. It is pos-
sible to cancel the current copying on this win-
dow.

• Do not turn off the power of the recorder while

copy is in progress. If the power is turned off while
copying, the storage media copied on will become
unusable.

• When another user operating the recorder has

opened the copy panel or when the destination
medium has been selected by another user, the
copy window cannot be displayed.