Asus P4P800 SE - Manual (Page 87)

ASUS P4P800-E Deluxe motherboard 4-25
Pallete Snooping [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Setting to [Disabled] deactivates this feature.
Configuration options: [Disabled] [Enabled]
PCI IDE BusMaster [Enabled]
Allows BIOS to use PCI bus mastering when reading/writing to IDE
devices. Configuration options: [Disabled] [Enabled]
IRQ xx [Available]
When set to [Available], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [Available] [Reserved]
PCI Slot - xx IRQ Preference [Auto]
Allows you to set the PCI slot IRQ Preference.
Configuration options: [Auto] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15]
The Module Version and USB Devices Enabled items show the auto-
detected values. If no USB device is detected, the item shows None.
4.4.6 USB Configuration
The items in this menu allows you to change the USB-related features.
Select an item then press Enter to display the configuration options.
USB Function [8 USB Ports]
Allows you to enable or disable the USB function.
Configuration options: [Disabled] [2 USB Ports] [4 USB Ports]
[6 USB Ports] [8 USB Ports]
USB Configuration
Module Version - 2.23.0-4.3
USB Devices Enabled :
None
USB Function [8 USB Ports]
Legacy USB Support [Auto]
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [HiSpeed]
USB Mass Storage Device Configuration
Enables USB host
controllers.