Asus P4P800 SE - Manual (Page 123)

ASUS P4P800 SE motherboard 5-21
5.7 Creating a RAID driver disk
A floppy disk with the Intel ® RAID driver is required when installing
Windows ® XP/2000 operating system. You can create a RAID driver disk
using the Makedisk.exe utility in the support CD.
To create a RAID driver disk:
1. Insert the motherboard support CD into the CD-ROM drive and locate
the Makedisk.exe utility for your RAID controller.
The Makedisk.exe utility for the Intel
® RAID driver is located in
“\Drivers\Chipset\IAA\Makedisk.exe” of the motherboard support
CD.
The Makedisk.exe utility for Intel ® RAID is supported in Windows ® XP/
2000 only.
2. Insert a clean floppy disk into the floppy disk drive and execute
Makedisk.exe. Follow succeeding screen instructions to complete the
process.
3. Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the F6 key
to install third-party SCSI or RAID driver.
2. Press then insert the RAID disk driver into the floppy disk drive.
3. Follow the succeeding screen instructions to complete the installation.