Acer 2700 - Manual (Page 67)

61 Chapter 3
6. Remove six screws that secure the main and secondary fan.
7. Remove the secondary fan from the lower case.
8. Remove the main fan from the lower case.
Remove the Speaker Set
1. Disconnect the speaker set cable from the main board.
2. Remove the screw that secure the speaker set on both side.
3. Remove the speaker from the lower case.
Disassemble the LCD module
1. Detach four screw caps as shown.
2. Remove four screws that secure the LCD bezel.
3. Snap off the snaps of the LCD bezel with fingers and detach the LCD bezel carefully.
4. Disconnect the inverter cable with tweezers and remove the inverter cable from the groove
5. Remove one screw that secures the inverter board.
6. Pull up the inverter board