Acer 2700 - Manual (Page 43)

Chapter 2 37
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS(Basic
Input Output System)
.
Your Computer is already properly configured and optimized, and you do not need to run this utility. However,
if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting wheb problem arises.
To activate the BIOS Utility, press m during POST(when”Pressto enter Setup”message is prompted on
the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without wntering BIOS Set Utility, please set the parameter to “enabled”.
Press during POST to enter multi-boot menu. In this menu,user can change boot device without
entering BIOS SETUP Utility.
PhoenixBIOS Setup Utility
. Info. Main Advanced Security Boot Exit
CPU Type: : Intel(R) Celeron(R) CPU 2.80GHz
CPU Speed:
System BIOS Ver: V0.08
VGA BIOS Ver: ATI M11
KBC Ver: V0.08
Serial Num ELW050011143010003ED00
Asset Tag Number:
Product Aspire 1670
Manufacturer Name: Acer
UUID: FFFFFFFFFFFFFFFFFFFF0023F080E52
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select 4 Sub - Menu F10 Save and Exit
HDD Model Name:
HDD Serial Number:
ST94019A-(PM)
3KW3MQSJ
2.80 GHz
ATAPI Model Name: HL-DT-STCD-RW/DVD DRIVE-(SM)
ATAPI Serial Mumber:
System Utilities
Chapter 2