Acer 2700 - Manual (Page 48)

42 Chapter 2
Note: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Quiet Boot Quiet Boot replaces the customary technical
messages during POST with a more visually
pleasing and comfortable display(OEM Logo
screen). During POST, right after the initialization
of VGA, The notebook displays an illustration
called the OEM screen during system boot
instead of the traditional POST screen that
displays the normal diagnostic messages. Option: Enabled or Disabled
Power on display Auto: During power process, the system will
detect if any display device is connected on
external video port. If any external display device
is connected, the power on display will be in
CRT(or projector) only mode. Otherwise it will be
in LCD only mode.
Both: Simultaneously enable both the integrated
LCD screen and the system’s external video
port(for an external CRT or projector) Option: Auto or Both
LCD Auto Dim Determines if the system will automatically dim
the LCD brightness in order to save power when
AC is not present.
The system will support and automatic dimming
of the LCD back light when the AC power is NOT
available(running on battery power) Option: Enabled or Disabled
Network Boot This feature allows the system to boot off of a
LAN when the hard disk is absent or has not
been loaded with the operating system. Option: Enabled or Disabled
F12 Boot Menu Enables, disables Boot Menu during POST Option: DIsabled of Enabled
Parameter Description Options