Acer 2700 - Manual (Page 45)

Chapter 2 39
Information
The screen below appears if you select Product Information from the main menu:
The Product Information menu contains general data about the system, such as the product name, serial
number, BIOS version, etc. These information is necessary for troubleshooting (maybe required when
asking for technical support).
Note: This system information is subject to different medels.
The following table describes the parameters found in this menu:
Parameter Description
CPU Type/speed Display CPU type and speed information
HDD Model Name Display the model name of HDD installed on primary IDE master
HDD Serial Number Display the serial number of HDD installed on primary IDE master
ATAPI Model Name This field displays the medel name of devices installed on secondary IDE
master. The hard disk drive or optical drive model name is automatically
detected by the system
ATAPI Serial Number Display the seiral number of devices installed on secondary IDE master
System BIOS Ver Display system BIOS version
VGA BIOS Ver Display VGA BIOS version
KBC Ver Display Keyboard controller version
PhoenixBIOS Setup Utility
. Info. Main Advanced Security Boot Exit
CPU Type: : Intel(R) Celeron(R) CPU 2.80GHz
CPU Speed:
System BIOS Ver: V0.08
VGA BIOS Ver: ATI M11
KBC Ver: V0.08
Serial Num ELW050011143010003ED00
Asset Tag Number:
Product Aspire 1670
Manufacturer Name: Acer
UUID: FFFFFFFFFFFFFFFFFFFF0023F080E52
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select 4 Sub - Menu F10 Save and Exit
HDD Model Name:
HDD Serial Number:
ST94019A-(PM)
3KW3MQSJ
2.80 GHz
ATAPI Model Name: HL-DT-STCD-RW/DVD DRIVE-(SM)
ATAPI Serial Mumber: