Adjust the flash output, To the exposure compensation, P145) – Panasonic DMC-G6KK User Manual
Page 145
145
Recording
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select [Flash] in the [Rec] menu.
2
Touch [Flash Adjust.].
3
Set the flash output by dragging the slide bar, and then touch [Set].
•
You can adjust from [j3 EV] to [
i
3 EV] in steps of [1/3 EV].
•
Select [n0] to return to the original flash output.
•
[
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
•
Only available when [Wireless] in [Flash] is set to [OFF].
•
The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to
.
•
The [Auto Exposure Comp.] setting also applies to an external flash.
Adjust the flash output
Synchronzing the output of the built-in flash to the Exposure
Compensation
DMC-G6PDF-VQT4Z78_eng.book 145 ページ ２０１３年４月２５日 木曜日 午前１０時５分