Panasonic KX-HCM110A User Manual
Page 97

Operating Instructions
[For assistance, please call: 1-800-272-7033]
97
4.
Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 70).
•
Clicking [ • Clicking [Cancel] takes you back to the Trigger page without saving Setting Description Enable Image • Check the box to enable the Trigger setting. Clear the box Trigger • Selecting [Timer] enables the camera to buffer/transfer the • Selecting [Alarm 1 or 2] enables the camera to buffer/ • Selecting [Motion Detection] enables the camera to Alarm enable • Selecting the method of the detection for an alarm • Select [Rising: GND to Open (High).] or [Falling: Open [Falling: Open (High) to GND.] is the state that GND pin Setting Description A day of the • Check the box to enable the day. Clear the box to disable it. Active Time of • Select the [Always] option when you do not specify the time
changes.
Buffer/Transfer
to disable it.
image by timer.
transfer the image by alarm signal.
capture/transfer the images when the motion detects
something.
condition
connected to the External I/O terminal.
(High) to GND.]. [Rising: GND to Open (High).] is the state
that GND pin and pin 1 or pin 2 is left open.
and pin 1 or pin 2 is short-circuited. (See page 145)
week
Trigger
period. If you specify the time period, select the time period
option and set the time period.