Panasonic KX-HCM110A - Manual (Page 123)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 123
2.21 Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm
Log, set Alarm 1, Alarm 2 or Motion Detection for Trigger Setting and check
[Enable].
1.
Click [Alarm Log] on the Setup page.
When selecting Alarm1, Alarm2 or Motion Detection in Trigger page, the Alarm
log window is displayed.
2. Set each parameter.
Note
• Click [Save] to save the settings.
• Clicking [Cancel] cancels your settings without saving changes.