Panasonic HX-A100D - Manual (Page 14)

- 14 -
Inserting/removing a microSD card
Caution:
Check that the access lamp
A has gone off.
≥ When this unit is accessing the microSD card (such as recognition, recording, playback and
deletion), the access lamp lights up.
C: Unlocked when the red indicator is visible
1
Slide the LOCK switch B to the left to unlock the side cover and
slide the side cover downward to open it and then insert (remove)
the microSD card into (from) the card slot.
≥ Face the terminal side D upward and press it straight in as far as it will go.
≥ Press the center of the microSD card and then pull it straight out.
2
Close the side cover and slide the LOCK switch B to the right to
lock it.
≥ Close the side cover and slide it upward and then lock it.
≥ Securely close it until it clicks.
≥ When the microSD card is removed, a notification sound emits, and the access lamp flashes fast.
(a state in which a microSD card is not inserted)
≥ Do not touch the terminals on the back of the microSD card.
≥ For handling of microSD card, refer to page
59 .
∫ About the access lamp
≥ When the access lamp is lit, do not:
j Remove the microSD card
j Turn this unit off
j Insert and remove the USB cable
j Expose this unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/microSD card or this
unit.
When using a microSD card not from Panasonic, or one previously used on other equipment, for
the first time on this unit, format the microSD card. (
l 21 ) When the microSD card is formatted,
all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
 A
B
D
C