Message displays, Others – Panasonic DMC-FZ70K User Manual
Page 210
Others
Message displays
VQT5B76
- 210 -
The following explains the meaning of major messages displayed on the LCD monitor or
viewfinder, and how to respond to them.
[Some pictures cannot be deleted] [This picture cannot be deleted]
●
Non-DCF pictures
cannot be deleted.
→ Save needed data on a computer or other device, and then use [Format] on the camera.
[Cannot be set on this picture]
●
[Print Set], [Title Edit], or [Text Stamp] cannot be made for non-DCF pictures
.
[Please turn camera off and then on again] [System Error]
●
This is displayed when the lens has stopped operating normally due to being pressed on by a hand
etc.
→ Turn the camera on again.
(Consult the dealer or your nearest Service Center if display still remains.)
[Some pictures cannot be copied] [Copy could not be completed]
●
Pictures cannot be copied in following cases.
- Picture of same name already exists in built-in memory when copying from card.
- File is not of DCF standard
.
- Picture taken or edited on a different device.
[Built-in memory full] [Memory card full] [Not enough space on built-in memory]
[Not enough memory on the card]
●
There is no space left on the built-in memory or the card. When you copy pictures from the built-in
memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.
[Built-In Memory Error] [Format built-in memory?]
●
Displayed when formatting built-in memory via computer, etc.
→ Reformat directly using camera. Data will be deleted.
[Memory card error. This card cannot be used in this camera. Format this card?]
●
The card format cannot be used with this camera.
→ Try with a different card.
→ Save needed data on a computer or other device, and then use [Format] on the camera.
[Insert SD card again] [Try another card]
●
Access to card has failed.
→ Insert card again.
●
Try with a different card.