Panasonic HC-V130K User Manual

Page 62

- 62 -

Select the video input on the TV.

≥ Example:

Select the [HDMI] channel with a HDMI mini cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)

≥ Check the input setting (input switch) and the audio input setting on the TV. (For more

information, please read the operating instructions for the TV.)

Change the mode to

to play back.

≥ When connecting the device to a television, the television image will not be displayed in the

following cases. Use the device’s LCD monitor.
j Recording video
j When setting PRE-REC

∫ To watch images on a regular

TV (4:3) or when both sides of
the images do not appear on
the screen

Change the menu setting to display the images
correctly. (Check the TV setting.)

≥ If you set the option to [4:3] and connect this

unit and the TV with the AV cable, images or
menu screens may be displayed in a reduced
size.

Example of images with a [16:9] aspect ratio
on a regular TV (4:3)

≥ If a wide-screen TV is connected, adjust the

aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)

∫ To display the on-screen

information on the TV

When the menu setting is changed, the
information displayed on the screen (operation
icon and time code etc.) can be displayed/not
displayed on the TV.

* This setting is only available in recording

mode.

: [SETUP]

# [TV ASPECT] # [4:3]

[TV ASPECT] setting

[16:9]

[4:3]

: [SETUP]

# [EXT. DISPLAY] #

desired setting

[SIMPLE]*:

Information partially
displayed

[DETAIL]:

All information displayed

[OFF]:

Not displayed