Panasonic HC-V130K - Manual (Page 58)

- 58 -
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted after
dividing.
≥ Set the mode switch to
, select the play mode selection icon, and select the AVCHD
scene. ( l 24 )
1
Select the menu.
2
Select the scene you wish to divide using the cursor button and press the
ENTER button.
3
Select to set the dividing point.
≥ It is convenient to use Slow-motion Playback and
Frame-by-frame Playback. ( l 51 )
≥ Select [YES] to continue dividing the same scene. To
continue dividing other scenes, select [NO] and repeat
Steps 2-3.
4
Press the MENU button to complete dividing.
≥ Unwanted parts can be deleted. ( l 56 )
To delete all the divided points
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided points
cannot be deleted.
: [EDIT SCENE] # [DIVIDE] # [SET]
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
0h00m15s 0h00m15s 0h00m15s