Allied Telesis 86251-05 - Manual (Page 27)

Patch 86251-05 For Rapier Switches and AR800 Series Modular Switching Routers SHOW IP IGMP 27
Patch 86251-05 for Software Release 2.5.1
C613-10356-00 REV F
Figure 3: Example output from the SHOW IP IGMP DESTINATION command showing Static Groups.
See Also SHOW IP IGMP DEBUG
IGMP Protocol
----------------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 270 secs
Last Member Query Interval ....... 10 (1/10secs)
Last Member Query Count .......... 2
Robustness Variable .............. 2
Query Response Interval .......... 100 (1/10secs)
Interface Name .......... vlan1 (DR)
IGMP Proxy .............. Off
Group List ..............
Group. 224.0.1.22 Static association Refresh time Infinity
Ports 1,3
Static Ports 3
Table 6: Parameters in the output of the SHOW IP IGMP DESTINATION command.
Parameter Meaning
Static Ports A list of the static ports; a subset of the ports listed in the
Ports field. The Static Ports field is only displayed for static
groups on a VLAN.