Sony DSC-T100 - Manual (Page 52)

52
Viewing menu For details on the operation 1 page 30
Protects images against accidental erasure.
To protect an image
1 Display the image you want to protect, or select the images on the index screen.
2 Press MENU to display the menu.
3 Select (Protect) with v/V, and select [This Image] with b/B, then press z.
The image is protected and the - (Protect) indicator appears on the image.
To select and protect images
1 Press MENU to display the menu.
2 Select (Protect) with v/V, and select [Multiple Images] with b/B, then press z.
In single-image mode:
3 Select the image you want to protect with b/B on the control button, then press z.
A
is attached to the selected image.
4 Press b/B to display other images you want to protect, then press z.
5 Press MENU.
6 Select [OK] with v, then press z.
In index mode:
3 Select the image you want to protect with v/V/b/B on the control button, then press z.
A
is attached to the selected image.
4 Move the highlight to the folder selection bar with b and select the folder that contains the
images you want to protect with v/V. Repeat step 3 to select other images.
5 To select all the images in the folder, press z in step 4.
A
is attached to the selected folder.
6 Press MENU.
7 Select [OK] with v, then press z.
A - (Protect) indicator appears on the selected images.
(Protect): Preventing accidental erasure
(This Image) Protects/unlocks the currently selected image.
(Multiple Images) Selects and protects/unlocks multiple images.
-