Sony LBT-GPX555 - Manual (Page 27)

model name [LBT-GPX555 / MHC-GPX888/GPX555]
[4-485-746-11(2)] GB
27 GB
filename[D:\NORM'S JOB\SONY HA\SO130081\LBT-GPX555MHC-
GPX888_GPX555 (PMRF 01)\4485746112\06BAS.fm] masterpage:Right
Blu
e
tooth
Notes
• When the system is not connected to any
Bluetooth device, the system will connect and
play back from the last connected Bluetooth
device automatically when you press N.
• If you try to connect another Bluetooth device
to the system, the current connected Bluetooth
device will be disconnected.
To disconnect the Bluetooth device
Press BLUETOOTH on the unit.
“BLUETOOTH” appears in the display
panel.
Depending on the Bluetooth device, the
Bluetooth connection may be canceled
automatically when you stop playback.
Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth function.
“BLUETOOTH” appears in the
display panel.
If the system is connected to a
Bluetooth device, the Bluetooth device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth device.
2
Hold down x and WAH for about
3 seconds.
“PAIR HISTORY” and “CLEAR”
appear in the display panel and all the
pairing information is erased.
Setting the Bluetooth
standby mode
The Bluetooth standby mode enables the
system to turn on automatically when you
establish the Bluetooth connection from a
Bluetooth device.
1
Press OPTIONS on the unit.
2
Press / repeatedly to select
“BT STANDBY”, then press .
3
Press / repeatedly to select
“STANDBY ON” or “STANDBY
OFF”.
4
Press ?/1 to turn off the system.
When the Bluetooth standby mode is
set to on, the system waits for a
Bluetooth connection even when the
system has been turned off. When a
Bluetooth connection is established,
the system turns on automatically.
Setting the Bluetooth
signal
You can connect to the system from a
paired Bluetooth device in all functions
when Bluetooth signal is set to on. The
Bluetooth signal is turned on by default.
Use the buttons on the unit to perform this
operation.
Hold down MOVIE/GAME and LED
COLOR for about 3 seconds.
“BT ON” or “BT OFF” appears in the
display panel.
Erasing all the pairing
registration information