Sony LBT-GPX555 - Manual (Page 12)

model name [LBT-GPX555 / MHC-GPX888/GPX555]
[4-485-746-11(2)] GB
12 GB
filename[D:\NORM'S JOB\SONY HA\SO130081\LBT-GPX555MHC-
GPX888_GPX555 (PMRF 01)\4485746112\05CON.fm] masterpage:Left
A Antennas
Find a location and an orientation that
provide good reception when you set up
the antennas.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
B LED SPEAKER terminals
Connect the LED SPEAKER connector of
the speaker to this terminal.
The lighting on the speakers will react
according to the music source. You can
select the illumination pattern and color
according to your preference (page 33).
Example:
C Audio
Use an audio cord (not supplied) to make
either connection as follows:
– AUDIO OUT/PARTY CHAIN OUT L/R
jacks
– Connect to the audio input jacks of an
optional equipment.
– Connect to another audio system to
enjoy the Party Chain function
(page 30).
– AUDIO IN 1/PARTY CHAIN IN L/R
jacks
– Connect to the audio output jacks of a
TV or an audio/video equipment. The
sound is output through this system.
– Connect to another audio system to
enjoy the Party Chain function
(page 30).
– AUDIO IN 2 L/R jacks
Connect to the audio output jacks of a
computer or gaming device. The sound
is output through this system.
D FRONT SPEAKERS and
SUBWOOFER(S) terminals
Connect the speaker connectors to match
the color of the speaker terminals of the
unit.
Example:
Notes
• Be sure to use only the supplied speakers.
• When connecting speaker cords, insert the
connector straight into the terminals.
E Power
Plug the power cord into a wall socket.
The demonstration appears in the display
panel. Press "/1 to turn on the system and
the demonstration automatically ends.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from the
plug (only for models equipped with an
adaptor).
AM loop antenna
Extend the FM lead
antenna horizontally
Gray