Sony PEG-N610C - Manual (Page 27)

Chapter1 Basic operations of your Sony CLIE Handheld
27
Resetting your Sony CLIE Handheld
Performing a hard reset
If the soft reset does not solve the problem, you need to perform a hard reset
to restart your CLIE handheld.
Note
With a hard reset, all records and entries stored in your CLIE handheld are
erased. Only perform a hard reset if a soft reset does not solve your problem.
If you save a backup of your CLIE handheld data on your computer, you can
restore any data previously synchronized with your computer during the
next HotSync
® operation.
1
Hold down the POWER button on your CLIE handheld.
2
While holding down the POWER button, use the reset tip to
gently press and release the reset button.
The Palm Powered logo screen is displayed.
3
Release the POWER button.
A message warning that you are about to erase all the data stored on your
CLIE handheld is displayed.
4
Press the upper half of the scroll button on the front panel of
your CLIE handheld.
Your CLIE handheld undergoes a hard reset.
After a hard reset, only the current date and time are retained. Formats,
Preferences, and other settings are restored to their factory default
settings.
Note
If the scroll button was used just prior to hard-resetting, the hard-reset may not be
performed.