Sony PEG-N610C - Manual (Page 141)

Chapter4 Communicating using your Sony CLIE Handheld
141
Beaming between your Sony CLIE Handheld and another Palm
OS
® PDA
Beaming information
You can beam a record, business card, or category of records between your
CLIE handheld and another Palm OS PDA.
1
Locate the record, business card, or category you want to
beam.
2
Tap the Menu icon.
3
Tap one of the following from the Record menu:
• The Beam command for an individual record
• In Address Book only: Beam Business Card
• Beam Category
4
When the Beam dialog box appears, point the IR port directly
at the IR port of the receiving handheld.
Tip
For best results, your CLIE handheld and another Palm OS PDA should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between the two
handhelds must be clear of obstacles and shielded from fluorescent lighting.
Beaming distance to other Palm OS PDA handhelds may be different.
5
Wait for the Beam dialog box to indicate that the transfer is
complete before you continue working on your CLIE
handheld.