Sony PEG-N610C - Manual (Page 132)

Chapter3 Exchanging and updating data using a HotSync ® operation
132
Advanced HotSync ® operations
5
Place your CLIE handheld on the cradle and then press the
HotSync
button on the front panel of the cradle.
The HotSync operation starts. This HotSync operation records the
network information about your computer onto your CLIE handheld.
6
Check if your computer‘s network information (Primary PC
name and Primary PC address) is entered in your CLIE
handheld:
1 Rotate the Jog Dial navigator to select HotSync and then press the
Jog Dial navigator. Or tap the HotSync
icon on the Application
Launcher screen.
The HotSync screen appears.
2 Tap the Menu icon.
3 Tap Primary PC Setup from the Options menu.
The Primary PC Setup screen is displayed.
4 On your computer, click the HotSync icon in the Windows task
tray and then select Setup from the shortcut menu.
5 Click the Network tab, then click TCP/IP Settings to open the TCP/
IP Settings screen.
6 Confirm that the Primary PC name and Primary PC address on both
screens displayed in step 3 and 5 match. If they do not, change
the Primary PC name and Primary PC address entered in your CLIE
handheld, then tap OK.
7 On your computer, tap OK to close the TCP/IP Settings screen and
the Setup screen.
Preparing your CLIE handheld and performing a network HotSync
operation
When dialing into a network (Network Modem Sync)
1
Rotate the Jog Dial navigator to select HotSync and then
press the Jog Dial navigator. Or tap the HotSync
icon on
the Application Launcher screen.
The HotSync screen appears.
2
Tap the Menu icon.
Continued on next page