Sony VGP-UVC100 - Manual (Page 12)

12
Closing the “VAIO Camera Capture Utility” software
Click , which is on the top right of the “VAIO Camera Capture Utility”
screen.
Changing the camera setting
To adjust the brightness, Backlight compensation, etc., go to “Property” of
“VGP-UVC100 device driver.”
In the “Property” screen, you can adjust the zoom or set up the frame.
To display the “Property” screen
Right-click the icon of the notification area, then click “Advanced
Settings.”
z
Hint
If this camera’s software is not started, “Advanced Settings” is not activated.
x“Settings” screen
In the “Settings” screen, change the following setting items:
– Mirror (flip horizontal), Image Flip, Low Light and Backlight
compensation.
z
Hint
“Low Light” is an effective function for capturing in low-light conditions. However,
image artifacts might occur as a result of lighting correction. Capturing in sufficient
light is always recommended.
– Brightness, Contrast, Gamma, Hue, Saturation and Sharpness
– Exposure and White Balance