O 138, Touch panel others – Sony DSC-TX5 User Manual
Page 138

Ta
ble
of
Op
e
MENU/Settin
In
138
GB
Cannot print the image at the size selected.
• When you replace the printer paper with paper of a different size after connecting the printer to the
camera, disconnect the cable for multi-use terminal connected to the printer and then reconnect the
printer.
• The print setting of the camera differs from that of the printer. Change the setting of either the camera
(page 127) or the printer.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time depending on
the printer.
Cannot operate the touch panel buttons correctly or fully.
• Perform [Calibration] (page 108).
• [Housing] is set to [On] (page 102).
The paint pen operation reacts at inappropriate points.
• Perform [Calibration] (page 108).
The lens gets fogged.
• Moisture condensation has occurred. Eject the battery pack and the memory card, then leave the
camera in a dry place with the battery/memory card cover open until the moisture evaporates.
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The Clock Set screen appears when you turn on the camera.
• Set the date and time again (page 116).
• The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for
24 hours or more with the power left off.
The date or time is incorrect.
• The Area Setting is set to a different location than your current location. Change the setting by
t
(Settings)
t (Clock Settings) t [Area Setting].
Touch panel
Others