Viewing an image on a standard definition (sd) tv – Sony DSC-TX5 User Manual
Page 117

Ta
ble
of
Op
e
MENU/Settin
In
117
GB
Viewing an image on a Standard
Definition (SD) TV
You can view images recorded on the camera in standard picture quality by connecting the
camera to a Standard Definition (SD) TV. Refer also to the operating instructions supplied with
the TV.
1 Turn off both the camera and the TV.
2 First, open the battery/memory card cover, then open the multi-connector
cover.
3 Connect the camera to the TV with the cable for multi-use terminal
(supplied).
4 Turn on the TV and set the input.
5 Press
(Playback) button to turn on the camera.
Images shot with the camera appear on the TV. Touch
/
displayed on the LCD screen of
this camera to select the desired image.
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 101).
• When you play back a single image, no icons are displayed on the TV.
• You cannot play back images in [Easy Mode] during TV output.
• When you shoot movies while the camera and a TV are connected, the image being shot is not displayed
on the TV.
• When you disconnect the cable for multi-use terminal and close the cover of the camera, first close the
multi-connector cover, then close the battery/memory card cover.
Notes
Cable for multi-use terminal
1
To audio/video input jacks
(Playback) button
2
To the multi-connector