Mi series – sirius setup screen, Accessing the sirius setup screen, Sirius setup – AMX DAS-SIRIUS User Manual
Page 13

Mi Series – SIRIUS Setup screen
9
DAS-SIRIUS Sirius Satellite Radio Tuner Module
Mi Series – SIRIUS Setup screen
Accessing the SIRIUS Setup Screen
1.
To access the SIRIUS menus on the Controller, press the SELECT button on the front of the Controller.
The following screen will be displayed (FIG. 15):
2.
Select Setup to display the System Setup Mode screen. If an on-board DAS-SIRIUS module is detected,
SIRIUS is displayed on this screen.
3.
Select SIRIUS (FIG. 16).
If there are two SIRIUS modules on-board, there is an additional screen that allows you to choose
between the two (FIG. 17):
SIRIUS Setup
1.
When SIRIUS is selected, the SIRIUS Setup screen is displayed (FIG. 18):
The options on this page are described in the following sub-sections:
FIG. 15
Mi Series Controller - Main Menu
FIG. 16
System Setup Mode menu
Use the Navigation button array (<< / >>) on the front of the Controller to navigate
through the menus, and the “SELECT” button to make a selection.
FIG. 17
SIRIUS Setup Mode menu (for Controllers with two DAS-SIRIUS modules on-board)
FIG. 18
SIRIUS Setup screen
Category
Channel
SIRIUS ID
Status
Exit SIRIUS Setup