Playing the images on a tv (continued) – Sony DCR-DVD910 User Manual

Page 46

Playing the images on a TV (Continued)

Notes

• When you connect your camcorder to a TV

compatible with the ID-1/ID-2 system, set [TV
TYPE] to [16:9]. The TV switches to full mode
automatically. Refer also to the instruction
manuals supplied with your TV.

• When you set [TV TYPE] to [4:3], the image

quality may deteriorate. Also, when the recorded
image’s aspect ratio switches between 16:9
(wide) and 4:3, the image may jitter.

• When you play back an image recorded in 16:9

(wide) aspect ratio on a 4:3 TV not compatible
with the 16:9 (wide) signal, set [TV TYPE] to
[4:3].

When your TV is monaural (When your
TV has only one audio input jack)

Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or the red
(right channel) plug to the audio input jack
of your TV or VCR.

Tips

• You can display the counter on the TV screen by

setting [DISP OUTPUT] to [V-OUT/PANEL]
(p. 82).