Sony KDL-55W900A User Manual
Page 41
(Over-Under)]/[2D (Left-Only)]/[2D (Top-Only)] may not be
selectable.
To return to the last viewed source, press the HOME button twice.
To exit the 3D Menu, press the RETURN button.
To turn off the Active 3D Glasses
Hold the (power) button of the Active 3D Glasses down for 2 seconds.
If no signal from the TV is detected for more than 1 minute, the Active
3D Glasses will turn off automatically. To turn them on again, press the
(power) button.
To use the Active 3D Glasses with another TV
It is required to re-register the Active 3D Glasses. Turn off the Active 3D
Glasses, then perform step 2.
To deactivate the 3D effect
Press the 3D button repeatedly to select [Off] in [3D Display].
To use the SimulView™ mode
SimulView™ allows two players to view independent screen images in
full screen while playing the same game on a shared screen. The image
is displayed in 2D. To use this feature, the game software must support
SimulView™.
When using this mode, the Active 3D Glasses automatically change to
SimulView™ mode. Every press the button of the Active 3D Glasses
can switch between the players as follows.
Mode: SimulView™ mode (Player 1) ←→ SimulView™ mode (Player 2)
Indicator: Yellow LED blinks once every 2 seconds with SimulView™
mode (Player 1) ←→ Yellow LED blinks twice every 2 seconds with
SimulView™ mode (Player 2)
To adjust the 3D settings
You can adjust the following 3D settings.
Press the HOME button, select [Settings] → [Picture & Display] →
[3D Settings], then the desired option.
[3D Display]
Opens [3D Display] to switch the display modes.
[3D Depth Adjustment]
Adjusts the depth of 3D pictures on the screen (available only for
35