3d picture/glasses symptoms – Sony KDL-55W900A User Manual
Page 215
Font Size
> 3D Picture/Glasses Symptoms
3D Picture/Glasses Symptoms
3D pictures are not displayed. 3D effect is weak.
Black bars appear on both sides of the screen when watching 3D pictures.
3D display automatically switches on when 3D signal is detected.
The message [3D signal has been detected] automatically appears when
3D signal is detected.
You cannot turn the Active 3D Glasses on.
LED indicator on the Active 3D Glasses blinks.
3D pictures are not displayed. 3D effect is weak.
Be sure that there are no obstacles between the TV and the Active 3D
Glasses.
Replace the battery in the Active 3D Glasses.
Be sure that the Active 3D Glasses are powered on.
If two pictures are displayed side-by-side, press the 3D button repeatedly
until [3D (Side-by-Side)] appears. If two pictures are displayed one above
the other, press the 3D button repeatedly until [3D (Over-Under)] appears.
If the [3D Display] screen appears and 3D pictures are not displayed, turn
off the device that plays 3D content and turn it on again.
Perceived 3D effect may vary from person to person.
3D effect may be less pronounced and the display color will be shifted if
you lie down or tilt your head.
It is necessary to register your Active 3D Glasses to the TV before use. To
use the glasses with another TV, it is necessary to re-register. Turn off the
glasses before re-registering.
Press the button to jump to the title list. Then, press the button again
to go to “Watch in 3D” for details.
Wireless devices or microwave ovens may affect the TV as the TV uses
218