Af illuminator auto review, Af illuminator (59) – Sony DSC-H2 User Manual
Page 59
59
Us
in
g
th
e S
et
up
sc
re
en
For details on the operation
1
page 56
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of
vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance
to the subject, if the subject does not see the pre-strobe, or other conditions.
The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings.
The AF illuminator emits red light allowing the camera to focus easily when the shutter button
is pressed halfway, until the focus is locked. The
indicator appears at this time.
• If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will
not be achieved. (A distance of up to approximately 2.7 m (106 3/8 inches) (zoom: W)/2.6 m
(102 3/8 inches) (zoom: T) is recommended.)
• Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the
center of the subject.
• When the manual focus is selected (page 38), AF Illuminator does not function.
• The AF range finder frame does not appear. The
,
or
indicator flashes, and AF operates with
priority on subjects located near the center of the frame.
• The AF illuminator does not operate when
(Twilight) or
(Landscape) is selected in the Scene mode
or when [Conversion Lens] is not set to [Off].
• The AF illuminator emits very bright light. Although there are no problems with safety, do not look
directly into the AF illuminator emitter at close range.
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• If you press the shutter button halfway down during this period, the recorded image display disappears
and you can immediately shoot the next image.
AF Illuminator
Auto
Uses the AF illuminator.
Off
Does not use AF illuminator.
Auto Review
On
Use the Auto Review.
Off
Does not use Auto Review.
ON