Sony DSC-H2 - Manual (Page 48)

48
For details on the operation 1 page 43
Selects the frame interval in the Multi Burst mode (page 41).
Adjusts the amount of flash light.
• The flash level can be set in 1/3 EV increments.
• The value is not displayed on the screen. It is indicated as + or –.
• To change flash mode
t step 5 in “Read This First”
• If the subject is too bright or dark, this adjustment may have no effect.
• When the flash mode is set to
(Flash forced off), you cannot adjust the flash level.
Adjusts the contrast of the image.
Adjusts the sharpness of the image.
See page 56.
(Interval) P S A M
1/7.5 (1/7.5") • Select Multi Burst with the /BRK button first, set the desired
setting for [Interval]. When you select a function other than
Multi Burst, this function is unavailable (page 41).
1/15 (1/15")
1/30 (1/30")
(Flash Level) P S A M
M +2.0EV Toward +: Makes the flash level higher.
0EV The amount of flash light that the camera adjusts
automatically.
m –2.0EV Toward –: Makes the flash level lower.
(Contrast) P S A M
+ ( ) Toward +: Enhances the contrast.
Normal
– ( ) Toward –: Reduces the contrast.
(Sharpness) P S A M
+ ( ) Toward +: Sharpens the image.
Normal
– ( ) Toward –: Softens the image.
(Setup) P S A M
M