Sony DSC-H2 - Manual (Page 57)

57
Us
in
g
th
e S
et
up
sc
re
en
For details on the operation 1 page 56
Camera 1
1
The default settings are marked with .
Selects the auto focus operation mode.
On the [Continuous] (C AF)
• Focus adjustment may not be able to keep up when shooting fast moving subjects.
• The AF range finder frame is Center AF (page 38).
• The focus is not adjusted after the lock is completed in the following cases, and the “C AF” indicator
flashes. The camera operates in [Monitor] mode.
– When shooting in the dark place
– When shooting with a slow shutter speed
• There is no lock sound when the focus is achieved.
• When you press the shutter button all the way down using the self-timer, the focus is locked.
Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 12×).
When the zoom scale exceeds 12×, the camera uses either smart or precision digital zoom.
AF Mode
Single (S AF) Automatically adjusts the focus when the shutter button is
pressed and held halfway down. This mode is useful for
shooting stationary subjects.
Monitor (M AF) Automatically adjusts the focus before the shutter button is
pressed and held halfway down. This mode shortens the time
needed for focusing.
• Battery consumption may be faster than in [Single] mode.
Continuous (C AF) Adjusts the focus before you press and hold the shutter button
halfway down, and then continues to adjust the focus even
after AF lock is completed.
This mode allows shooting of moving subjects with
continued focus.
• Battery consumption may be faster than in any other AF mode.
Digital Zoom
Smart
(Smart zoom)
(
)
Enlarges the image digitally with almost no distortion. This is
not available when the image size is set to [7M] (DSC-H5),
[6M] (DSC-H2) or [3:2].
• The maximum zoom scale of Smart zoom is shown in the
following table.
Precision
(Precision digital zoom)
(
)
Enlarges all image sizes up to a maximum of 24×, but the
image quality deteriorates.
Off Does not use the digital zoom.