Sony PCV-RZ46G - Manual (Page 81)

Troubleshoot your IR control cable
If you use a set-top box , you must use an IR control cable to relay the IR commands sent when buttons are pressed on the Media
C enter remote. If the IR control cable is not set up correctly, your set-top box cannot work correctly with Media C enter.
Note The remote works with Media C enter without an IR control cable; however, the IR control cable is what enables the
computer to work with your set-top box.
Make sure that your IR control cable is connected correctly. For information about your particular configuration and to make sure that
your devices are connected correctly, refer to your hardware documentation.
© 2000-2003 Microsoft C orporation. All rights reserved.
Page 81