Airlink X EV-DO User Manual

Page 80

Raven X EV-DO for Verizon - User Guide, version 2.34

AT Commands: PPP/Ethernet

*HOSTPRIVMODE=n

*HOSTPW=string

*HOSTUID=string

d.d.d.d=IP Address

Set or query whether a private or public (network) IP is to be used when the Host initiates a
EV-DO connection to the modem.

n=0 : Public (network) IP Mode: When the Host initiates a PPP connection, the host will be given the
network IP address that was obtained from Verizon while registering on the network. If the network
issues a new IP address, the

EV-DO

connection will be closed (since the IP address has changed) and

has to be re-initiated. (default).

n=1 : Private IP Mode: When the Host initiates a

EV-DO

connection, the host will be given the IP

address specified in *HOSTPRIVIP. The modem will then perform 1 to 1 NAT-like address translation,
which shields the Host from network IP changes.

Host Password for PAP, or CHAP, or PPPoE.

string=password

Host User ID for PAP, or CHAP, or PPPoE.

string=user id (up to 64 bytes)