Serial – Airlink X EV-DO User Manual

Page 67

Raven X EV-DO for Verizon - User Guide, version 2.34

AT Commands: Serial

This group includes commands specific to the serial port.

+++

Serial

FIGURE 1.

Common : Serial

Note:

This command is not proceeded by AT nor does it require a carriage return

(enter).

There must be an idle time (set by S50) on the serial port before and after this com-
mand.

The “+” is ASCII 0x2B.

AT Escape sequence.

If the

Raven X

is in a data mode (any mode other than PassThru), this command causes the modem to

re-enter AT command mode.

Cannot be configured in Wireless Ace.

Note:

This command does nothing if DAE=1.