Air King 9224 - Manual

Rev. J 9/06 8 5084028
Rev. J 9/06 1 5084028
* Articulo Incluyendo el numero de Empaques 5098012
** Patas de caucho con remache no incluidas
Ref. NO. DE PARTE DESCRIPCIÓN CANT.
1 02084613 Adorno Tipo Ojo de Buey 1
2 5097021BK Rejilla Delantera 1
3 5081015BKB Paleta 1
4 5090012 Tornillos 5/16-24 1
5 2091212Z Tornillos del motor 10-32 x 5/16 5
6 5097020BK Rejilla Trasera con Placa de 1
Pivote Con Hexagonal
7 * Perno de 1/4-20 x 1 4
8 5062086BK Patas 2
9 * Arandela de Seguridad 2
10 * Tuerca de 1/4-20 2
11 02030024SK Perilla del Interruptor 1
12 02030024SW Interruptor 1
13 02030224 Conjunto del Motor 1
14 02030024CS Juego de Alambre Flexible 1
15 5062211BK Manija 1
16 05010051 Empuñadura de la manija 1
17 5090050 Eje tapa Perno 2
18 05010050 Ruedas 2
19 5062215BK La Barra del Eje 1
20 5062215BK Escuadra de montaje 1
21 2090058B Tornillo #8 X 7/16 2
22 02011601 Espaciador de caucho 2
6
5
13
8
9
12
11
10
7
2
3
1
14
9
7
10 4
17
18
21
20
19
17
18
16
15
22
22
SPECIFICATIONS
Motor ................................. 120V , 50/60 Hz
Blade diameter .................. 24" (60.96cm) Model9224
Speeds .............................. 3
Control .............................. Rotary Switch
Air flow distribution ........... 190˚
Approvals .......................... UL Listed. Close mesh fan guard
meets OSHA requirements.
DESCRIPTION
The AirKing 24" (60.96 cm) pivot/floor fan features 3-speed operation
with a 3-paddle fan blade. The fan has an enclosed motor with
permanently lubricated ball bearings with a 10 ft (3.05 m) 18/3 cord set,
and is constructed of sturdy powder coated steel.
24" FLOOR FAN
24" (60.96cm) MODEL 9224
OPERATING INSTRUCTIONS & PARTS MANUAL MODELO 9224
UNPACKING
When unpacking the unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts.
GENERAL SAFETY INFORMATION
1. Read all instructions before using Fan.
2. Make certain that the power source conforms to the electrical
requirements of the Fan.
3. Use this Fan only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should
not be played with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH AS
THE SOLE MEANS OF DISCONNECTING POWER WHEN IN-
STALLING OR SERVICING THE FAN. ALWAYS UNPLUG THE
POWER CORD.
6. This Fan must NOT be used in potentially dangerous
locations such as flammable, explosive, chemical-laden
or wet atmospheres.
7. DO NOT use Fan in or near a window. Rain may create an
electrical hazard.
8. Completely assemble Fan, according to instructions, before
connecting to power supply.
9. The power cord is equipped with a three-prong grounded plug
that must be inserted into a matching receptacle. Under no cir-
cumstances should the ground prong be cut off the plug. Where
a two-prong wall receptacle is encountered, it must be replaced
with a properly grounded three-prong receptacle installed in ac-
cordance with the National Electrical Code (NEC) and all appli-
cable local codes and ordinances. This work must be done by a
qualified electrician, using copper wires only.
WARNING: DO NOT USE A THREE-PRONG ADAPTER. IM-
PROPER CONNECTION MAY CAUSE THIS RISK OF ELEC-
TROCUTION. USE OF SUCH ADAPTERS IS NOT PERMITTED
IN CANADA.
10. Where possible, avoid the use of extension cords. If they must be
used, minimize the risk of overheating by ensuring that they are
UL listed. Never use a single extension cord to operate more than
one Fan.
11. Do not operate any Fan with a damaged cord or plug or after the
Fan malfunctions, has been dropped or damaged in any manner.
Return Fan to authorized service facility for examination, electrical
or mechanical adjustment or repair.
12. Do not insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock
or fire, or damage the Fan. Do not block or tamper with the Fan
in any manner while it is in operation.
13.Always place the Fan on a stable, flat, level surface when
operating, to avoid the chance of the Fan overturning. Locate the
Power Cord so the Fan or other objects are not resting on it. Do
not run Power Cord under carpeting. Do not cover Power Cord
with throw rugs, runners, or the like. Arrange Power Cord away
from room traffic and where it will not be tripped over.
14.This Fan is not intended for use in wet or damp locations.
Never locate a Fan where it may fall into a bathtub or other
water container.
15. Do not use Fan outdoors.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE
SPEED CONTROL DEVICES.
SAVE THESE
INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
MODEL 9224
SPEED HIGH MED LOW
CFM 5130 4490 3670
M 3 /s 2.42 2.12 1.73
RPM 1500 1250 1000
Amps 2.03 1.81 1.63
Watts 229 200 176
dB A 72 69 64