Air King 9856M1 User Manual
Important instructions - operating manual, Read and save these instructions, Save these instructions
www.airkinglimited.com
984856M1 Rev. A 9-06
1 of 4
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock and injury to person, including the following:
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK AND INJURY TO PERSON, OBSERVE THE FOLLOWING:
1.
Read all instructions before installing or using fan.
2.
Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3.
Before servicing or cleaning the unit, switch power off at
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When
the service disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the
service panel.
4.
Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes
and standards, including fire-related construction.
CAUTION:
THIS FAN MUST NOT BE USED IN POTENTIALLY
DANGEROUS LOCATIONS SUCH AS FLAMMABLE, EXPLOSIVE,
CHEMICAL-LADEN OR WET ATMOSPHERES.
5.
Make certain that the power source conforms to the electrical
requirements of the fan.
SAVE THESE INSTRUCTIONS
6.
The fan must be hung with at least 10 feet of clearance from
the floor to the blades.
7.
Completely reassemble fan according to instructions before
reconnecting to power supply.
WARNING:
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE BRACKETS OR BLADES WHEN
INSTALLING THE BLADES, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBLECTS IN
BETWEEN THE ROTATING FAN BLADES.
8.
This fan is not for use in wet or damp locations.
9.
Do not use fan outdoors and never locate the fan where it
may fall into a bathtub or other water container.
10. This unit must be grounded.
11. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off
power unit.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED
CONTROL DEVICE.
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
Models: 9848M1, 9856M1
Ceiling Fan