Sony DSC-P200 - Manual (Page 83)

83
Tr
oubl
es
hoot
ing
Printing is canceled.
• You disconnected the cable for multi-use terminal before the (Do not disconnect cable
for multi-use terminal) mark disappears.
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
• The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 69).
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the cable for multi-use terminal and reconnect it whenever you change the paper
size after the printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 69) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
Your camera does not work.
• Use an “InfoLITHIUM” battery pack (page 90).
• The battery level is low (The E indicator appears). Charge the battery pack ( t step 1 in
“Read This First”).
• Connect the AC Adaptor securely to the DC IN jack of your camera and to a wall outlet (wall
socket) (
t step 1 in “Read This First”).
The power is on, but the camera does not work.
• The built-in microcomputer is not working properly. Disconnect, and then, after one minute,
reconnect all power sources and turn on the camera. If this does not work, reset the camera
(page 74).
Others