Sony DSC-P200 - Manual (Page 51)

51
U
si
ng the
S
e
tu
p s
cr
een
For details on the operation
t
page 43
Setup 2
2
The default settings are marked with .
Selects the method used to assign file numbers to images.
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the cable for multi-use terminal.
Sets the video signal output according to connected equipment.
File Number
Series Assigns numbers to files in sequence even if the recording
folder or the “Memory Stick” is changed. (When the replaced
“Memory Stick” contains a file with a number higher than the
last assigned number, a number one higher than the largest
number is assigned.)
Reset Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
USB Connect
PictBridge Connects the camera to a PictBridge compliant printer (page
67).
PTP When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
selected by the camera are copied to the computer.
(Compatible with Windows XP and Mac OS X.)
Normal Connects the camera to a computer (page 56).
Video Out
NTSC Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL Sets the video output signal to PAL mode (e.g., for Europe).