Sony DSC-S500 - Manual (Page 39)

39
U
si
ng the
S
e
tu
p s
cr
een
Using the Setup screen
Using Setup items
You can change the default settings using the Setup screen.
1
Turn on the power.
2
Press MENU to display the menu.
3
After pressing B on the control button, go to the (Setup) setting, then
press B again.
4
Press v/V/b/B on the control button to select the item you want to set.
The frame of the selected item turns yellow.
5
Press z to enter the setting.
To turn off the (Setup) screen, press MENU.
To return to the menu from the (Setup) screen, press b on the control button repeatedly.
To cancel the (Setup) setting
Select [Cancel] if it appears, then press z on the control button. If it does not appear, select
the previous setting again.
• This setting is maintained even when the power is turned off.
v/V/b/B button
z button
Mode dial
Control button
MENU button