Sony MZ-S1 - Manual (Page 31)

31
-GB
Recording a track into an
existing group
• Turn group mode on.
• Insert a disc with group settings.
1
Press GROUP.
“
” flashes in the display and you
can select a group directly (Group
Skip Mode) (page 35).
2
Within 5 seconds, press . or >
repeatedly until the group you want
the track to belong to appears.
3
Press N while pressing REC.
4
Play the source sound.
The newly recorded track is added
after the current contents.
Notes
• Even if “R-Posi” is set to “FrHere”, newly
recorded tracks are inserted after the existing
tracks in the specified group without
recording over the current contents.
• Group skip mode turns off automatically in
step 2 if nothing is done within 5 seconds.
To continue the procedure, do step 1 again.
z
To add a track that is playing to a group, stop
playing the track first, and then do the
procedure from step 3.
Recording without
overwriting existing
material
If you wish to avoid overwriting the
current contents of an MD, do the
following procedure. All new material
will then be recorded from the end of the
current contents. The recorder is factory
set to record over existing material.
1
While the recorder is stopped, press
MENU.
2
Press . or > until “OPTION”
flashes in the display, and then press
ENTER.
3
Press . or > repeatedly until
“R-Posi” flashes in the display, and
then press ENTER.
4
Press . or > repeatedly until
“Fr End” flashes in the display, and
then press ENTER.
To start recording from the
current point
Select “FrHere” in step 4.
z
To temporarily record without recording over
the current contents, press END SEARCH
before the start of recording. The recording will
begin after the last track, even if “R-Posi” is set
to “FrHere” (factory setting). The remaining
recordable time on the disc will appear in the
display when you press END SEARCH.
MENU/ENTER
Control key
(./>)