1. Turn over the remote commander and remove the battery compartment cover.
2. Remove both old batteries and insert two new AA batteries (minus (-) end of each

battery first), then close the cover.

Note

If the remote commander is not going to be used for an extended period of time, remove

the batteries.

Since the remote cannot be used with the commercially available rechargeable

batteries, use the non-rechargeable AA batteries. If you use the rechargeable batteries,

battery leakage may occur, resulting in a malfunction.

When the battery power becomes low, replace with the battery promptly. Keeping

depleted batteries in the remote may cause battery leakage.

Do not recharge the dry cell AA batteries.

286

Search

This manual is related to the following products:

SVL24125CXW SVL24127CXB SVL24125CXB