Sony PEG-SJ22 - Manual (Page 92)

92
Sony Personal Entertainment Organizer A-BGK-100-11 (1)
Performing the IR HotSync
®
operation
Exchanging and updating data using the HotSync
®
operation (Other
HotSync
®
operations)
Performing the IR HotSync
®
operation
You can perform the IR HotSync
®
operation when you have prepared your
computer setting, CLIÉ handheld setting and Conduit Setup.
1
Rotate the Jog Dial™ navigator to select [HotSync] icon on
the Application Launcher screen and press the Jog Dial™
navigator.
The HotSync screen is displayed.
Tip
You can also tap [HotSync] icon to display the HotSync screen.
2
Tap Local.
3
Tap the arrow V and select IR to a PC/Handheld.
4
Point the IR port of your CLIÉ handheld directly at the IR port
of your computer.
For best results, your CLIÉ handheld and your computer should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between
your CLIÉ handheld and your computer must be unobstructed.
5
Tap the HotSync icon.
The HotSync
®
operation starts.
The message will be displayed to note that the HotSync
®
operation is
complete.
To restore the local HotSync settings
When performing the local HotSync
®
operation with the USB cable and plug
adapter after you set for the IR HotSync
®
operation, you need to restore the
local HotSync settings.
1
Connect your CLIÉ handheld and your computer.
2
Click the HotSync icon in the Windows task tray and
select Local USB from the HotSync Manager shortcut
menu.