Sony PEG-SJ22 - Manual (Page 89)

Sony Personal Entertainment Organizer A-BGK-100-11 (1)
89 Exchanging and updating data using the HotSync
®
operation (Other
HotSync
®
operations)
Customizing HotSync
®
Manager start-up and
HotSync
®
setup options
1
Click the HotSync icon in the Windows task tray and
select Setup from the HotSync Manager shortcut menu.
The Setup window is displayed.
2
Click the General tab and select a setting as needed.
If you are not sure which option to use, select Always available .
• Always available: Starts the HotSync
®
Manager when Windows
starts. This allows you to perform the HotSync
®
operation even when
the Palm™ Desktop for CLIÉ software is not running.
• Available only when the Palm™ Desktop is running: Starts the
HotSync ® Manager when you start the Palm™ Desktop for CLIÉ
software.
• Manual: Starts the HotSync ® Manager only when you select
HotSync Manager from the Windows Start menu.
3
Click the Local tab and adjust the setting for the connection
between your CLIÉ handheld and your computer as needed.
• Serial port: Specifies the computer port that is used for the HotSync
®
operation. Note that the serial port for the HotSync ® operation cannot
be shared with the port for modem.
• Speed: Determines the speed at which data is transferred. Try the As
Fast As Possible rate first, and adjust downward if you have any
problems. You do not need to set the speed when you perform the
HotSync
® operation with the supplied USB cable and plug adapter.
4
Click the Modem tab and select the setting for the modem
as needed.
b For details, refer to “Performing the HotSync
®
operation via a modem” on page
93.
5
Click the Network tab and select the setting for the network
as needed.
6
Click OK to finish.