Sony PEG-SJ22 - Manual (Page 48)

Exchanging and updating data using the HotSync
®
operation 48
Sony Personal Entertainment Organizer A-BGK-100- 11 (1)
Performing the HotSync
®
operation
Note
Do not remove the USB cable from your CLIÉ handheld until the
HotSync
®
operation is complete as the Palm™ Desktop for CLIÉ
software may not close normally.
If the HotSync
®
operation does not start
when you tap the HotSync
®
icon
Make sure that the HotSync icon is displayed in the
Windows task tray.
If the HotSync
icon is not displayed in the task tray, click
Start, then select Programs (All Programs in Windows
®
XP), Sony Handheld and HotSync Manager. Check that
the HotSync
icon is displayed in the task tray and tap the
HotSync icon on the HotSync screen to start the HotSync
®
operation.
The message is displayed on your computer screen when the
HotSync
®
operation starts.
* From this point onwards, where Windows XP Home Edition and
Windows XP Professional are common, they will both be referred to
as Windows XP.
Notes
• Do not tap the HotSync icon during the HotSync
®
operation as
it may cause errors and the operation may quit.
• Do not enter the power saving mode during the HotSync
®
operation.
If your computer is turned to the power saving mode during the
HotSync
®
operation, HotSync Manger will be forced to quit.
Tip
If you cannot perform the HotSync
®
operation
Refer to “Troubleshooting Q&A.”