Sony PEG-SJ22 - Manual (Page 91)

91
Sony Personal Entertainment Organizer A-BGK-100-11 (1)
Performing the IR HotSync
®
operation
Exchanging and updating data using the HotSync
®
operation (Other
HotSync
®
operations)
2
Click the HotSync icon in the Windows task tray again
and select Setup from the HotSync Manager shortcut
menu.
The Setup window is displayed.
3
Click the Local tab.
4
Adjust the following settings as needed.
• Serial port : Specifies a virtual port for an infrared port. If you are not
sure of the connection port, refer to the Infrared Monitor in the
Windows Control Panel .
• Speed : Determines the speed at which data is transferred. Try the As
Fast As Possible rate first, and adjust downward if you have any
problems.
5
Tap OK.
The IR HotSync
®
operation is enabled.
Note
When performing the local HotSync
®
operation with the USB cable and plug adapter
after you set for the IR HotSync ® operation, you need to restore the local HotSync
settings.
b For details, refer to “To restore the local HotSync settings” on page 92.
Continued on next page
• • • • • • • • • • • • • • •