Sony MDR-10RBT - Manual (Page 74)

Help Guide
MDR-10RBT Top > Troubleshooting > Possible causes of symptoms >
Getting Started
BLUETOOTH
One-touch
connection (NFC)
Music
Phone calls
Multi point
connection
Troubleshooting
Important
information
Contents list
Music
No sound
Check that both the headset and the BLUETOOTH device are
turned on.
An A2DP BLUETOOTH connection is not made between the
headset and the BLUETOOTH device. Use the BLUETOOTH
device and make an A2DP BLUETOOTH connection.
Check that music is being played back by the BLUETOOTH
device.
Check that the volume of the headset is not set too low.
Turn up the volume on the connected device if necessary.
Pair the headset and the BLUETOOTH device again.
Low sound level
Turn up the volume of the headset.
Turn up the volume on the connected device if necessary.
Low sound quality
Use the BLUETOOTH device and switch the BLUETOOTH
connection to A2DP (Advanced Audio Distribution Profile) when
HFP (Hands-free Profile) or HSP (Headset Profile) is set.
If you have previously connected this BLUETOOTH device, only
an HFP/HSP BLUETOOTH connection may be made when the
headset is turned on. If this happens, use the BLUETOOTH
device and make an A2DP BLUETOOTH connection.
Sound skips frequently during playback.
Set the headset to the “Priority on stable connection” mode.
For details, refer to “ Selecting the sound quality mode of music
playback .”
Phone calls
© 2013 Sony Corporation
74
SEARCH